|
|
|
|
The nominal 5/16” head of the AGS-100 series pins are perfect for attaching plywood, OSB,
exterior gypsum sheathing and fiber cement boards to steel framing 14ga and lighter. Designed for use with the Model 510 tool, the ballistic point and knurled shank combine to produce maximum holding strength. Like all ET&F .100” pins, these fasteners have Aericote ® 1000 coating, which provides 1000 hour salt spray corrosion protection.
See ICC Report 5585 for design values for attaching gypsum sheathing, DensGlass® Gold and Fiberock® to light gauge steel. See
ICC Report NER-405 for design values for use with James Hardie fiber cement siding.
Refer to
ICC Report 4144 for design values for
wood based panels used as horizontal
diaphragms and shear walls.
|
| PART NO. |
LENGTH (inch) |
PINS PER COIL |
CASE QTY. |
| AGS-100-0150NA |
1-1/2 |
250 |
9000 |
| AGS-100-0200NA |
2 |
250 |
9000 |
| AGS-100-0250NA |
2-1/2 |
250 |
6000 |
|
|
Stuccofast® pins and washers were developed to securely fasten stucco lath and insulation to light gauge steel. AKN-100 series pins and galvanized steel or plastic washers are supplied in combination for use with the ET&F Model 500M tool. Multiple pin lengths provide fastening solutions for most popular insulation thicknesses. Other washer styles are available upon request.
|
| PART NO. |
PIN LENGTH (IN) |
WASHER MATERIAL |
WASHER STYLE |
WASHER DIA (in) |
CASE QTY |
| AKN-100-0150NA(T or F) |
1-1/2 |
STEEL |
TABS or FLAT |
1-1/4 |
10,800 |
| AKN-100-0200NA(T or F) |
2 |
STEEL |
TABS or FLAT |
1-1/4 |
10,800 |
| AKN-100-0250NA(T or F) |
2-1/2 |
STEEL |
TABS or FLAT |
1-1/4 |
7,200 |
| AKN-100-0150NA(3 or 4) |
1-1/2 |
PLASTIC |
STEM or FLAT |
1-3/4 |
10,800 |
| AKN-100-0200NA(3 or 4) |
2 | PLASTIC |
STEM or FLAT |
1-3/4 |
10,800 |
| AKN-100-0250NA(3 or 4) |
2-1/2 |
PLASTIC |
STEM or FLAT |
1-3/4 |
7,200 |
|
|
|
