|
|
|
|
AKN-144 PINS
The knurled shank AKN-144 pins are
supplied collated for use with the AERICO® 90 or Model 900 tools. These pins are typically used to fasten plywood, OSB or lumber to steel members ranging in thickness from 68mil (14 ga)
to 3/16 thick. Fastener length is
determined such that the fastener point
penetrates the steel by at least . Select either plastic or tape collated pins (25 pins/strip) for the AERICO® 90. Select 1-3/4" minimum length and plastic collation only for the Model 900 tool. See ICC Report No. 4144 for performance data.
Custom sizes and packaging is available for special requirements. Contact us for more information about lengths not shown below.
|
| PART NO. |
LENGTH (IN) |
COLLATION |
CASE QTY |
| AKN-144-0125C |
1-1/4 |
TAPE |
7000 |
| AKN-144-0125P |
1-1/4 |
PLASTIC |
3750 |
| AKN-144-0150C |
1-1/2 |
TAPE |
6000 |
| AKN-144-0150P |
1-1/2 |
PLASTIC |
3750 |
| AKN-144-0175C |
1-3/4 |
TAPE |
5000 |
| AKN-144-0175P |
1-3/4 |
PLASTIC |
3750 |
| AKN-144-0200C |
2 |
TAPE |
4000 |
| AKN-144-0200P |
2 |
PLASTIC |
2500 |
| AKN-144-0225C |
2-1/4 |
TAPE |
4800 |
| AKN-144-0225P |
2-1/4 |
PLASTIC |
2500 |
|
|
|
