Drywall Constractors

PANELFAST® SYSTEM FOR WOOD, GYPSUM & CEMENT PANELS TO STEEL

 

The PANELFAST® Model 510 Tool and AGS-100 pins comprise the PANELFAST® system. The sequential fire Model 510 pneumatic tool has adjustable depth control that precisely places the pin at the desired depth in plywood, gypsum sheathing, Dens Glass Gold, Fiberock, fiber cement siding and even vinyl siding. One tool does it all!

 

The exclusive design of thePANELFAST® Model 510 tool drives the largest 0.100” headed pin on the market, providing maximum wind pressure resistance even in gypsum based sheathing materials. The tool accepts pins 1-1/2”, 2” and 2-1/2” in length and is designed for use with steel 27mil (22ga) to 68mil (14ga) thickness.

 

All details: Panelfast® Model 510

PANELFAST® SYSTEM FOR WOOD, GYPSUM & CEMENT PANELS TO STEEL

 

The PANELFAST® Model 510 Tool and AGS-100 pins comprise the Panelfast system. The sequential fire Model 510 pneumatic tool has adjustable depth control that precisely places the pin at the desired depth in plywood, gypsum sheathing, Dens Glass Gold, Fiberock, fiber cement siding and even vinyl siding. One tool does it all!

 

The exclusive design of the Model 510 tool drives the largest 0.100” headed pin on the market, providing maximum wind pressure resistance even in gypsum based sheathing materials. The tool accepts pins 1-1/2”, 2” and 2-1/2” in length and is designed for use with steel 27mil (22ga) to 68mil (14ga) thickness.

 

All details: Panelfast® Model 510

MODEL E45 FOR FACE NAILING SIDING, STEEL-TO-STEEL AND GYPSUM WALL BOARD FASTENING

 

Using sheet plastic collation, this system eliminates plastic residue from under the head of driven pins for a clean installation. The tool operates at a maximum air pressure of 120psi and has the power to attach fiber cement siding to steel as thick as 97mil (12ga). Reduce the air pressure and adjust the overdrive knob and the tool accurately attaches wallboard to steel as thin as 20ga.

 

The Model E45 handles pins 1" long to 2-1/2" long. For face nailing fiber cement siding, use AKN-100-XXXXHA pins. For fastening interior wall board, use ADW-100 pins. For select steel-to-steel applications of up to two layers of 54mil (16ga) with rigid bracing use ASK-100-XXXXH pins.

 

This versatile tool can also be used for special applications requiring wire collated pins or stainless steel pins. Call for details.

 

All details: Model E45